CURRENT COLLECTORS FOR MINE TROLLEY LOCOMOTIVES
Type D Trolley Harps
Applications: For portal busses, light duty haulage locomotives, and mine jitneys.
Features: Phoenix Type D Trolley Harps consist of Fletco process malleable iron castings. Pole head is designed to fit standard mine trolley pole. Contact and bearing surfaces are milled to fine adjustment without binding. A coil spring is furnished with each harp to hold it parallel with the wire. Dual clamp plate is high strength bronze alloy designed to accommodate two 4/0-35OMCM motor cables. Each Type D Trolley Harp is furnished with a single 4/0 shunt. A 444.4MCM single shunt is available as an option (#18032).
Phoenix Type D Trolley Harps are available with two styles of collector shoes: #9117 malleable iron and #9133 naval bronze. Both shoes are grooved for maximum wire contact without "hanging" on clamps or frogs.
A collector shoe is furnished with each harp. Order replacement shoes separately.
|
Catalog No. |
Description |
Wt./Ea. |
|
9115 |
Type D Trolley Harp - with Iron Shoe - Complete |
12.07# |
|
9132 |
Type D Trolley Harp - with Bronze Shoe - Complete |
12.10# |
Replacement Parts for Type D Trolley Harps
|
Catalog No. |
Description |
Wt./Ea. |
|
9117 |
Type D Iron Shoe Only |
2.84# |
|
9133 |
Type D Bronze Shoe Only |
2.88# |
|
18012 |
Pole Head Casting Only |
4.20# |
|
18028 |
Harp Casting Only |
2.00# |
|
9118 |
Bronze Clamp Plate Only |
.40# |
|
9135 |
King Bolt, Washer, and Hex Nut Only |
.50# |
|
9114 |
Bronze Retaining Pin with Cotters |
.42# |
|
9120 |
4/0 Copper Shunt Cable |
.83# |
|
18032 |
444.4MCM Copper Shunt Cable |
2.25# |
|
8941 |
Thur-Bolt for Pole Head |
.12# |
|
8944 |
Coil Spring Only |
.03# |
|
9113 |
1 x 5/8" - 11 Cap Screw for Shoe |
.20# |
|
9129 |
1 1/4" x 5/8" - 11 Cap Screw and Lockwasher Only |
.28# |